Results 1 to 13 of 13
Threaded View
-
13-01-2011, 11:03 AM #8
Re: Mitsubishi Ecodan Control Question
Ecodan uses standard central heating controls so a 2 channel timeclock and a room termostat are all the end user needs as an interface. If the cylinder is sized for a typical days hot water usage then the 1 hour boost on the 2 channel programmer will not need to be used frequently.
ASHPs can work well in northern scotland if the system is correctly designed and installed. The same applies to a GSHP (or any other form of heating), but if you have issues with one of these it can be even more difficult to rectify.
Similar Threads
-
Mitsubishi "I Feel" Remote Control
By Rangie in forum Air ConditioningReplies: 5Last Post: 07-01-2009, 07:54 PM -
Airwell Florida Inverter Air Condition - in need of help
By AndY1 in forum Air ConditioningReplies: 21Last Post: 05-07-2008, 10:48 AM -
Frick Quantum LX Compressor control panel: Capacity Control Screen
By screw_geek in forum Industrial CompressorsReplies: 17Last Post: 15-06-2008, 06:47 AM -
Loading / Unloading Control Question...
By Bluenoser337 in forum Industrial CompressorsReplies: 31Last Post: 02-05-2006, 06:03 PM -
Control Question!
By balerjoe in forum IndustrialReplies: 4Last Post: 20-11-2005, 08:32 AM