Results 1 to 5 of 5
Thread: brine tank calculation
-
26-10-2010, 03:24 AM #1
brine tank calculation
could anyone help us with the brine tank calculations? formulas and samples? we are conducting our thesis and we need how to compute the volume of the brine needed to convert a certain mass of water into ice. thanks..
-
21-11-2010, 05:55 PM #2
Re: brine tank calculation
Hi there,
i am not sure that i understand the question...do you mean the volume of brine that should be sufficient to freeze some amount of water? Or you meant something else..Try to post some schematic view of what you want and i will try to help you
-
07-01-2011, 03:12 PM #3
Re: brine tank calculation
you understood it right.. can you helpl me? or how do you design a brine tank? calculations? formulas? samples pls.. thanks..
-
08-01-2011, 08:29 AM #4
Re: brine tank calculation
I am on holiday up to next week and my scripts are at my work place..If that is not to late i will give you the formula next week
Be careful about reading health books. You may die of a misprint.
-
12-01-2011, 07:51 PM #5
Re: brine tank calculation
Q ∆ϑ = Usable heat quantity for charge or discharge process in [kJ] or [kWh], dependent on the temperature difference ∆ϑ between tank supply and return
V St = Tank capacity in [Liter]
ρ = Density of the heat carrying medium [kg/l] p = Specifi
c heat capacity of the heat carrying medium, kJ/(kg*K)
η = Level of tank utilization [-], at maximum capacity η=0.9
∆ϑ = Difference between tank supply and return temperature
Q∆ϑ = VSt ρ cp η ∆ϑ [kJ]
and from this you can easily find the tank volume.
Use sum of latent and sensible heat.Be careful about reading health books. You may die of a misprint.
Similar Threads
-
size of brine tank for 10ton block ice plant
By boy in forum IndustrialReplies: 14Last Post: 05-01-2011, 12:12 AM -
Calculation bypass buffer tank volume
By abbasi in forum New TechnologiesReplies: 3Last Post: 16-10-2008, 06:19 AM -
size of brine tank
By boy in forum Air ConditioningReplies: 6Last Post: 29-07-2008, 03:03 PM -
How an expansion tank works?
By Raadster in forum FundamentalsReplies: 6Last Post: 25-07-2008, 02:25 PM -
oil in tank heat load calculation
By abbasi in forum FundamentalsReplies: 7Last Post: 13-06-2005, 08:36 AM