We are setting up a new injection molding machine facility in Michigan and need to cool our molds with 45-50F degree water.

We currently have 2 molds and machines that require apporx. 25 ton each of cooling.

However, we also have future plans for additonal loads (within 1 year) and thus want to make sure we do this project right the first time.

I'm looking at early 2000 model chillers (Crarrier and Trane) and am thinking about a 75-100 ton unit.

I have a line on an unused 2003 Carrier GXN080 chiller and am wandering if this is a decent make/model.

We are plannign to have a 500-1000 gallon insulated pump tank also.

Thanks in advance for your help.

Brian