Results 1 to 4 of 4
Thread: Mypro CP III communication
-
20-10-2010, 04:48 PM #1
Mypro CP III communication
Has anyone ever succeded installing communication between Mycom Mypro CPIII and a PLC.
So far we could not succeded it.
-
21-10-2010, 03:59 PM #2
Re: Mypro CP III communication
What's your proplem ?
-
21-10-2010, 09:04 PM #3
Re: Mypro CP III communication
you can`t connect the CPIII with a BUS to some other PLC... you just have a few output contact where give you some reference about the running condition
-
24-12-2010, 12:00 AM #4
Re: Mypro CP III communication
Hi, sorry the MYPRO 3 panel only has a RS485 communication.
So any modbus or profibus is not possible with this CP3, if needed you can always upgrade to a PLC S7 but the cost is quite high.
Similar Threads
-
Climaveneta - Modbus communication
By davide_botta in forum Technical DiscussionsReplies: 12Last Post: 04-11-2010, 11:56 PM -
Communication question
By Husky250 in forum Air ConditioningReplies: 12Last Post: 19-07-2010, 08:22 AM -
Mini-Split Communication
By Husky250 in forum Air ConditioningReplies: 2Last Post: 22-05-2010, 02:38 PM -
Lost Communication in SBII
By shabusasami in forum Trouble ShootingReplies: 1Last Post: 07-05-2010, 09:03 PM -
Danfoss Adapcool problem communication
By lucynenih in forum Supermarket RefrigerationReplies: 7Last Post: 18-10-2009, 05:28 PM