Results 1 to 2 of 2
Thread: Factory set a TX6-Z15
-
19-10-2010, 06:38 PM #1
Factory set a TX6-Z15
hi guys,
Got a couple of these on a job (TX6-Z15 Alco controls expansion valve) I am going to and I want to set them to factory superheat setting (or as close as possible) I know they have been altered by others. I can find info on setting back the TCLE, HF, A and TRAE family of valves but nothing on the TX6 family? The chart i found says half the total turns is approx factory setting but as i say, it doesn't include the TX6 family?
any help would be greatly appreciated hopefully someone has had the same problem before :/Last edited by SkyWalker; 19-10-2010 at 06:42 PM.
-
23-12-2010, 12:50 PM #2
Re: Factory set a TX6-Z15
Hi Skywalker,
Mainly ALCO has two main parts ALCO Flow Controls USA and ALCO Europe. The TX6 Series are produced only for Europe, so this is why you will find info about the on the European site only.
You can find info on how to change the superheat for this valves in the TX3 operating instructions, you can find it under this link with emersonclimate.eu/Literature/Alco/RU_PL_NL_IT_FR_ES_DE_CS_EN_TX6_65012.pdf
I work for ALCO, so if you ever have questions on our products you can also ask me per mail at sabin.vlad@emerson.com
All the best
Similar Threads
-
Ice Block Machine: Hoping to start an Ice Factory. Please Help!!
By promise1 in forum CommercialReplies: 15Last Post: 02-01-2011, 01:26 AM -
Water Flow in evaporator exceeds the factory rating, what will happen?
By aryramadhan in forum FundamentalsReplies: 7Last Post: 07-02-2010, 09:33 AM -
I need book about factory for
By alisa in forum Refrigeration BooksReplies: 0Last Post: 28-10-2009, 05:08 PM -
factory A/C too small
By Sledge in forum CommercialReplies: 7Last Post: 26-05-2007, 12:46 AM -
New Israeli factory in Wales
By chemi-cool in forum New TechnologiesReplies: 1Last Post: 10-01-2005, 11:07 PM