Compressor start Relay sizing

[xxx2fan]

Hi
I have a frigidaire freezer 1999 year with a RF107-1 Americold 1624-3699 2.17 FLA 14.0 LRA 3699-0149372compressor. I've searched all over for the correct size relay ie. 1/16 hp 1/4 hp for it it had a 8EA 401 relay on it. This unit has me stuck Trying to figure out which aftermarket relay to use on the bad boy. Live in a small town in PA and do some trying to retire.
Thanks for any help

[Brian_UK]

This any use to you, first try with Google.
http://www.carbonbrush.com/klixon8EA.htm

[xxx2fan]

Thanks I found that earlier I was trying to find out what size compressor it was. 1/4 hp 1/3 hp etc as to aftermarket units I have oh hand here are sized that way. Thanks for the help. That chart doen't do that. I've looked all over for the Americold 1624-3699 RF107-1 HP size. Guess I'm getting to old for this computer stuff. Thanks again

[Brian_UK]

Previous thread on here perhaps...
http://www.refrigeration-engineer.co...ad.php?t=25040

[powell]

I cannot find the Americold specs but the Tecumseh manual crosses it to an AEA1380YXA which is 1/4 HP.

I hope this helps.

[monkey spanners]

Based on the FLA current and correcting for your 110V supply i'd say about 1/7th hp, its more guess work than science though...

Powell beat me too it as i was working it out!

[powell]

Powell beat me too it as i was working it out!

And you have me by 8 hours.............

[digerious]

supco make universal relays,1/12 to 1/2 hp

[armyeng1]

I am looking for a replacement relay/thermal switch combo for a Electrolux model TF113A
Ser 405-0348
Prod 9222030
Current Relay 117U4024/220V
PW 11 K 22

Danfoss relay 117U2070 also on part

[Quality]

Good Luck

[monkey spanners]

SRW do some universal relays for small comps, the may even do the correct one.

http://www.srw.co.uk/

Might by worth giving them a call.
If those relays had been burning for a while then the comps may well have died anyway...