Results 1 to 6 of 6
Thread: Capillary Tube Lengthening
-
15-10-2010, 08:10 PM #1
Capillary Tube Lengthening
Hi, could somebody tell me if it possible to lengthen a capillary tube by brazing another section to it using somekind of coupler?
-
15-10-2010, 08:38 PM #2
Re: Capillary Tube Lengthening
Anything is possible, can you not purchase some of the correct length.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
15-10-2010, 11:33 PM #3
-
16-10-2010, 09:17 AM #4
Re: Capillary Tube Lengthening
Thanks coolrunnings, I will try it.
-
26-10-2010, 10:57 PM #5
Re: Capillary Tube Lengthening
yes it is possible to add a splice i saw one on a dorm sized mini frige i recently scrapped for the metals.
it looks like either the manufacturer ran out of long enough line on 1 roll and spliced to another roll or a repair was made where the filter drier was replaced with one from another junker and spliced.
-
02-11-2010, 06:40 AM #6
Re: Capillary Tube Lengthening
respect sir.
i have a designing for case cat ref system.how to select refrigerant.than avoid chocking problem in low stage.please clear me
Similar Threads
-
Capillary tube size, refrigerant, oil
By desA in forum FundamentalsReplies: 53Last Post: 23-02-2010, 05:11 AM -
capillary tube
By Zuradzman in forum Air ConditioningReplies: 1Last Post: 08-06-2009, 01:29 PM -
Capillary Tube Characteristics
By Chef in forum FundamentalsReplies: 9Last Post: 10-03-2009, 01:03 PM -
Distributor & Capillary tube position
By MrReds in forum Technical DiscussionsReplies: 12Last Post: 29-03-2008, 07:40 AM -
metric capillary tube
By tralex in forum FundamentalsReplies: 5Last Post: 21-02-2006, 06:57 AM