Results 1 to 12 of 12
Thread: Seal for FRICK #53M0602G02
-
13-10-2010, 09:30 PM #1
Seal for FRICK #53M0602G02
I have a customer looking for a replacement mechanical seal for that and i have no idea what will work. How do you find seal replacement information for these?
-
14-10-2010, 12:41 AM #2
Re: Seal for FRICK #53M0602G02
try JOHN CRANE OR BURGMANN, they can to rapair your shaft seal or try to do it with good turner . composition you can find en shaft seal manuals.
-
14-10-2010, 09:43 AM #3
Re: Seal for FRICK #53M0602G02
Hi, I'm sorry but I do not know the part number 53M0602G02 do not know what the compressor.
I know only 534M0602G02, it is a screw Frick xjf 151st
Is this correct?
Josef.
-
15-10-2010, 07:14 PM #4
Re: Seal for FRICK #53M0602G02
Josef,
That is probably the right part number, it looks like one of the digits was dropped in the translation. And they just told me it is a Frick 151 but they didn't include any letters in the model number.
Bear
-
15-10-2010, 07:38 PM #5
Re: Seal for FRICK #53M0602G02
Why do you not want to seal the Frick?
Josef.
-
15-10-2010, 07:59 PM #6
Re: Seal for FRICK #53M0602G02
Thanks ping, where can I find those manuals?
Bear
-
15-10-2010, 08:40 PM #7
Re: Seal for FRICK #53M0602G02
Josef,
I'm not sure what you mean.
Bear
-
15-10-2010, 10:11 PM #8
Re: Seal for FRICK #53M0602G02
look at:http://www.mechanicalseals.net
http://net.grundfos.com/doc/webnet/w...haft_seals.pdf
Best regards, Ping
-
18-10-2010, 08:12 PM #9
Re: Seal for FRICK #53M0602G02
Hi Ping,
Thanks for the links. I am familiar with mechanical seals, that's what I do.
The issue is identifying which seal will do the job so I need a type, shaft size, face materials, elastomers, etc.
Is there a place to find that information for that Frick?
Bear
-
18-10-2010, 08:55 PM #10
Re: Seal for FRICK #53M0602G02
Frick information is very closed, i had worked in York about 10 years and all information is very limited.
-
18-10-2010, 09:07 PM #11
Re: Seal for FRICK #53M0602G02
Hi Ping,
Thanks for the effort. I do appreciate your willingness to help.
Bear
-
19-10-2010, 01:54 PM #12
Re: Seal for FRICK #53M0602G02
Oroiginál parts Frick (JCI), otherwise the problems.
Josef.
Similar Threads
-
Halls shaft seal replacement
By Loafa in forum Industrial CompressorsReplies: 0Last Post: 02-08-2010, 03:46 AM -
Frick Premature Seal Failures
By Steve Wright in forum Industrial CompressorsReplies: 32Last Post: 11-06-2010, 02:34 PM -
shaft seal failure
By modvalve in forum Industrial CompressorsReplies: 8Last Post: 01-04-2010, 06:02 PM -
Frick 193 shaft seal
By NH3ISFORME in forum NH3Replies: 12Last Post: 14-03-2010, 09:35 PM -
Frick shaft seal leaking
By Ian B in forum Industrial CompressorsReplies: 12Last Post: 27-01-2009, 10:31 PM