help me

[ezzat]

hi all

i have a workshop for repair the Coldroom and i have a used 10 aircoold condenser without nameplate . i want to now the compressor suitable for it . how
plz lead me with pdf or software or formula
for calculate the relation between length of pipes , diameter of pipes with HP NO.

Thanks for cooperation with me

regards
ezzat

[ezzat]

hi all
what can i do
for sizing condensers

[Magoo]

ezzat.
more information required. Refrigerant, size of freezer/ chiller, operating temps etc., etc.,

[Toolman]

Ring someone and ask for them to sell you what you nees or give more details on the room size .

[ezzat]

again. i have aircold condenser and
the length of pipe = 21 m 3/8
what the compressor suitable for it

thanks again
ezzat

[chemi-cool]

Please get the details of the coils:

Rows up-
rows deep -
fins per inch -
coil length -
fan size and number -

refrigerant -

[Toolman]

Ring someone and ask for them to sell you what you need or give more details on the room size .

Your better off buying a complete condensing unit you will not save much money using your old condenser , most wholesalers will bend over backwards to sell you the equipment just tell them what you have .

[ezzat]

hi chemi-cool

please give me the catalogue or formula for calculate any condenser

thanks chemi-cool
ezzat

[Toolman]

hi chemi-cool
please give me the catalogue or formula for calculate any condenser, thanks chemi-cool
ezzat

rolleyes: Look for one on the www

[spinerkop]

rolleyes: Look for one on the www

wonder if he ever got it sorted?

[chemi-cool]

hi chemi-cool

please give me the catalogue or formula for calculate any condenser

thanks chemi-cool
ezzat

As a rule of thumb its about 20 m per HP.

If the ambient is high and evaporator temp is high too, it will be OK for 25% less and vice versa.

[ezzat]

thank u very much chemi-cool for help me
but i want to all rule of thumbs at you for calculate any condensers . please

thanks again chemi-cool

ezzat