Results 1 to 24 of 24
Threaded View
-
07-07-2005, 10:54 PM #1
Split type wall mounting Air Conditioning system
This particular system came with pre-flared 5m x 10mm pipes and 5m x 6mm pipes.
Having installed the indoor unit carefully without kinking the copper pipes, I wasn’t so lucky when I connected the last 10mm pipe to the outside unit. I gave the pipe such a bad kink I don’t think the gas will get trough properly.
My question is two fold.
A) Can I simple purchase another fully prepared i.e. pre-flared 10mm pipe, 5m in length?
b) Purchase a few couplings to make the job easier in the first place and avoid another mistake of kinking a pipe when trying to bend it?
All I can establish about purchasing copper pipe is the thickness of it and how that tends to tends to be relevant to the preinstalled frigerant gas - my system uses R407c.
Can anyone recommend a supplier in the UK that could supply either of the two options above? a link would be great.
I would extremely grateful for any advice as I feel such an idiot about ruining the whole installation because of 1 stupid mistake.
Look forward to hearing from you guys soon.
SteveLast edited by stevews; 08-07-2005 at 07:01 AM.
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
System Burn Out Troubleshooting
By altaf22m in forum Technical DiscussionsReplies: 13Last Post: 07-05-2010, 09:24 AM -
Burn out System, Clean up procedure. & Troubleshooting.
By altaf22m in forum CommercialReplies: 19Last Post: 15-04-2008, 07:03 PM -
Air conditioning system cleaning issue
By Lc_shi in forum Legal-Business-MarketingReplies: 2Last Post: 24-08-2006, 03:03 PM -
can a r22 split system condensing unit be used to cool a display fridge
By tsangep in forum RefrigerantsReplies: 8Last Post: 20-05-2006, 04:21 PM