Results 1 to 5 of 5
Thread: Help for cascade systems
-
22-09-2010, 06:49 PM #1
Help for cascade systems
Helo, needed help from someone who works with the system in cascade. I need to build a system in cascade of 40KW and -80 º C. Someone can help me with this project.
Respects
-
22-09-2010, 07:27 PM #2
Re: Help for cascade systems
40 kW
This is an extremely big machine. Where will you install your evaporator, in what kind of enclosure?
This is a very difficult task.
Do you have an idea about the expansion tanks you will need?
Do you need -80°C or -75°C? This can be very important.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
22-09-2010, 09:37 PM #3
Re: Help for cascade systems
Hello, Peter_1, this is for a freezing tunnel According 2.40mx 3.60 mx 2.40 m Height
This is to freeze fish, -75 ° C fits perfectly.O treadmill from entering the fish Until he leaves 15 minutes. Entering this fish at -5.
-
30-09-2010, 11:58 AM #4
Re: Help for cascade systems
Hi sergioo.
We've been involved in the design and build of a few low temperature cascades in the past few years. The most recent was a 60kW plant designed to evaporate at -95°C.
What information are you looking for ?
-
30-09-2010, 02:51 PM #5
Re: Help for cascade systems
-75°C for abatement? This is news to me.
Similar Threads
-
Vrv
By tgoonter in forum Air ConditioningReplies: 4Last Post: 11-01-2011, 06:25 AM -
Efficient Tri-Generation Systems
By Kevin_N in forum New TechnologiesReplies: 2Last Post: 07-03-2010, 11:16 PM -
Sensible Heat Factor / capacity of Inverter split Systems at part load?
By Greengrocer in forum Technical SpeculationsReplies: 31Last Post: 09-02-2009, 04:57 PM -
HFCs for flooded systems?
By garyb in forum RefrigerantsReplies: 15Last Post: 21-04-2006, 10:02 PM