Results 1 to 3 of 3
Thread: dryer problem
-
15-09-2010, 07:53 PM #1
dryer problem
Hi
I have a problem with a integeral dryer on an air compressor, dewpoint showing 28 degrees should be around 3, dryer comp running but very hot,fan coming in a bit.when gauges on needle going right round ,there is gas in system, any ideas , cheers
-
15-09-2010, 08:06 PM #2
Re: dryer problem
Recover the refrigerant, change the drier and charge again.
check the high pressure module that start the condenser fan, compressor should be cold.
134a is it?
-
15-09-2010, 08:20 PM #3
Re: dryer problem
Hi
yes gas is r134 .change filter dryer and re-charge did u say.
cheers
Similar Threads
-
MFI AMP6855 defrost problem
By gliderpilot47 in forum DomesticReplies: 4Last Post: 12-01-2011, 12:11 PM -
A strange problem
By MuhengineeR in forum Air ConditioningReplies: 14Last Post: 27-10-2010, 05:21 PM -
Danfoss ICAD/ICM Valve problem
By piewie in forum NH3Replies: 3Last Post: 11-09-2010, 09:20 AM -
problem with GE air con power problem
By Richie101 in forum Air ConditioningReplies: 6Last Post: 05-11-2009, 04:00 PM -
Cryo dryer?
By Air duster in forum New TechnologiesReplies: 9Last Post: 25-04-2007, 09:47 AM