Results 1 to 7 of 7
Thread: pipe sizes
-
14-09-2010, 11:45 AM #1
pipe sizes
i have a couple of arneg units that have a funny size of suction pipe, its just a little bit smaller than 1/2 inch and a big bit larger than 3/8th can anyone shed some light on what size of pipe this is.
-
14-09-2010, 12:38 PM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,175
- Blog Entries
- 6
- Rep Power
- 36
Re: pipe sizes
Measure it with sliding rule! It could be metric size pipes of 10 an 12 mm.
Last edited by nike123; 14-09-2010 at 12:45 PM.
-
14-09-2010, 06:47 PM #3
Re: pipe sizes
Yep, got to agree with Nike. It's metric fridge pipe.
I have had it with Pastorfrigor/Coolfast dairy decks.
Eggs
-
14-09-2010, 07:10 PM #4
Re: pipe sizes
Yep!
Metric it is!
I had the same with a couple of Alfa Lava condensers.
I ended up swaging the pipe to accommodate Imperial Tails!
I hope this Helps?
Cheers Grizzly
-
14-09-2010, 07:21 PM #5
Re: pipe sizes
cheers guy's it appears to be 12mm the problem i have is we removed the unit from airside of a airport to change a compressor, the engineer cut the suction and liquid line asuming it was 1/2 inch and 3/8 suction, with the plan of fitting flared strait connectors once we fitted the compressor, turned out to be 12mm pipe suction and 5/16th liquid arrrrggghhhhhh.
-
16-09-2010, 10:17 PM #6
Re: pipe sizes
i can predict the future......its hotwork permit nightmare!
-
17-09-2010, 03:40 AM #7
Re: pipe sizes
i like it when you have to book your tools in but not three inch tek screws
mmm to beer or not to beer...........lets drink breakfast
Similar Threads
-
Mitsubishi PUHZ-RP200YHA Pipe Sizes
By gwilliamson in forum Air ConditioningReplies: 11Last Post: 14-05-2008, 09:43 PM -
Pipe sizes help !!!!!!
By mig in forum Technical DiscussionsReplies: 10Last Post: 13-02-2008, 09:54 PM -
pipe sizes
By dunny123 in forum Air ConditioningReplies: 11Last Post: 20-01-2008, 02:59 PM -
Pipe sizes
By benncool in forum Chit Chat & Service StoriesReplies: 10Last Post: 08-07-2003, 10:58 PM