Results 1 to 8 of 8
  1. #1
    Join Date
    Dec 2008
    Location
    greece
    Age
    47
    Posts
    227
    Rep Power
    16

    Chrysler compressor information



    Hello guys!I am going to maintain a
    Chrysler water chiller model HWW 150-1.
    It has a Chrysler compressor model 3075-1.
    I want to overhaule the compressor.Does anybody
    have an overhaule manual or an internal drawing
    of the compressor?



  2. #2
    Join Date
    Aug 2006
    Location
    England
    Posts
    495
    Rep Power
    21

    Re: Chrysler compressor information

    Hi harry i worked on a chrysler compressor about 15 years ago and you need to take out 2 head bolts(opposites) and put in about 1inch long bolts in there place and then undo the rest of head bolts, because they have very strong and high springs on them which hold down the discharge carrier ,and then unscrew the 2 long bolts out slowley until the both springs are fully decompressed and then remove head covers safely,the internal is almost same as trane e body compressor .

  3. #3
    Join Date
    Dec 2008
    Location
    greece
    Age
    47
    Posts
    227
    Rep Power
    16

    Re: Chrysler compressor information

    Hi Ghaz!Thanks for the reply.Do you have a diagram
    of that compressor?Do you know if there are spare parts?

  4. #4
    Join Date
    Aug 2006
    Location
    England
    Posts
    495
    Rep Power
    21

    Re: Chrysler compressor information

    hi go to cmp corporation web site and they are very good parts and just veiw the spares you need and order them,they have all the spares for your compressor

  5. #5
    Join Date
    Aug 2008
    Location
    London
    Age
    69
    Posts
    59
    Rep Power
    16

    Re: Chrysler compressor information

    Hi Harry, Chrysler Airtemp stuff is very hit and miss for info, and this sounds old!

    Can you confirm the compressor model also as there is some info on a model 3075-00 and 3075-01 - but not 3075-1.

    At this stage all we can ascertain is that it should be a 6 cylinder, 75HP semi-hermetic, but the bore and stroke info is not something that you will find on the nameplate and so extremely difficult to source parts and literature.

    If you can advise specific parts you require we will see what we can do - but definately no guarantees!

    Please advise

  6. #6
    Join Date
    Dec 2008
    Location
    greece
    Age
    47
    Posts
    227
    Rep Power
    16

    Re: Chrysler compressor information

    I think it is 3075-1.Do you believe that there is difference between those models?

  7. #7
    Join Date
    Aug 2008
    Location
    London
    Age
    69
    Posts
    59
    Rep Power
    16

    Re: Chrysler compressor information

    The truth is Harry I don't know, I have only ever had about 10 dealings on their stuff in over 37 years of supplying spares, it has never been easy - If you can change the "I think" to "I am sure" it will be better - if not - if I can get hold of the spares - then It would have to be for the 3075-01 and you to verify before ordering..!

  8. #8
    Join Date
    Dec 2008
    Location
    greece
    Age
    47
    Posts
    227
    Rep Power
    16

    Re: Chrysler compressor information

    Search for 3075-1 ed and i will see it again..

Similar Threads

  1. Chrysler Grand Voyager 2.8 CRD 2006 air con
    By Paulo Spinola in forum Transport
    Replies: 3
    Last Post: 26-07-2010, 11:20 PM
  2. Looking for Chrysler Airtemp Info
    By RickSter in forum Air Conditioning
    Replies: 5
    Last Post: 24-01-2009, 12:36 AM
  3. Chrysler Grand Voyager Condenser
    By Latte in forum Transport
    Replies: 6
    Last Post: 15-07-2007, 11:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •