Selection of capillary tubes

[patrickj]

Will some one direct me to the selection charts.TR,pressure drop, lenght,sizeetc :

[chemi-cool]

Hi Patrick,
One pdf file can be seen here:
http://www.refrigeration-engineer.co...ead.php?t=1731

Aother one can be seen here: www.supco.com

good luck

Chemi

[Andy W]

Depending on the application I have used the KMP Kap Kit or even fitted an expansion valve many times.

[patrickj]

Cemicool - thanks for the quick reponse.The job I had to use capillary is completed siccrsfully.

[chemi-cool]

Good!

Chemi

[botrous]

Chemi u've said in a previous post (i've readt it when i followed the link that you posted here) that you have thousants of pdf files and that you have a better file about cappilary tube than the one posted . but it's large so u need an email adress to send it ... is that offer still up ? and is it up for me or just for the one you were adressing to

[Kevin S]

Some of the selection software from eg Tecumseh has an option where the cap tube is automatically selected for the exact application you intend to use the compressor for. You can simply find the equivalent compressor on the program, enter the design conditions and then presto the software will tell exactly what dia and length cap to use!

[romaurie]

Many thanks to "Chemi-cool" for the cap sizing chart. Been all around the planet on the "net" to replace the old "SP" chart from Australia that I have been using for many years. --& I end up getting this info locally' (I'm based in Eilat)
Cheers!

[chemi-cool]

romaurie,

תן לי צילצול ל- 054-7738801 אני לא רחוק.

Sorry guys, local dialect, Just asked him to give me a call/

Chemi

[labtec]

Just wanted to ask available capillary tube size for 5 tR R22 airconditioning system

[steveg]

Some of the selection software from eg Tecumseh has an option where the cap tube is automatically selected for the exact application you intend to use the compressor for. You can simply find the equivalent compressor on the program, enter the design conditions and then presto the software will tell exactly what dia and length cap to use!

its really good software if you can get hold of the CD. i also use the ACC Compressor website (electrolux). the larger (over 18cc) compressors they make are poor but the software they have on the website is really good

[Crystal-426]

thank you very much! recently i have already found these informations.