Plastic pallets

[smpsmp45]

We face a typical situation.
The Pallets if to be used in Drive in Racking need a bracing on 1200mm side. Typical Pallet size is 1200 x 1000mm. The form entry is from 1200mm side.
The bracing makes it difficult for the stacker to lift the pallet unless we use slave pallet on the ground. below this pallet.

If anyone knows a company which can make 1200 x 1000mm pallet with no bracing on 1200mm side but can take a dynamic load of 1000 kgs if put in drive in racking rails?

[taz24]

We face a typical situation.
The Pallets if to be used in Drive in Racking need a bracing on 1200mm side. Typical Pallet size is 1200 x 1000mm. The form entry is from 1200mm side.
The bracing makes it difficult for the stacker to lift the pallet unless we use slave pallet on the ground. below this pallet.

If anyone knows a company which can make 1200 x 1000mm pallet with no bracing on 1200mm side but can take a dynamic load of 1000 kgs if put in drive in racking rails?

I think I know what you mean but to be sure put a photo up please.

taz

.

[smpsmp45]

I am not sure if I can upload the file now.

[taz24]

I am not sure if I can upload the file now.

I would try these.

http://www.chep.com/Home.aspx?lang=en-ZW

I'm not sure if they do your pallet but they will know.

All the best

taz

.

[smpsmp45]

Many Thanks. I shall contact them,.