Results 1 to 5 of 5
Thread: Plastic pallets
-
24-08-2010, 05:56 AM #1
Plastic pallets
We face a typical situation.
The Pallets if to be used in Drive in Racking need a bracing on 1200mm side. Typical Pallet size is 1200 x 1000mm. The form entry is from 1200mm side.
The bracing makes it difficult for the stacker to lift the pallet unless we use slave pallet on the ground. below this pallet.
If anyone knows a company which can make 1200 x 1000mm pallet with no bracing on 1200mm side but can take a dynamic load of 1000 kgs if put in drive in racking rails?
-
24-08-2010, 09:13 AM #2
-
24-08-2010, 11:11 AM #3
Re: Plastic pallets
I am not sure if I can upload the file now.
-
24-08-2010, 12:58 PM #4
Re: Plastic pallets
I would try these.
http://www.chep.com/Home.aspx?lang=en-ZW
I'm not sure if they do your pallet but they will know.
All the best
taz
.
-
25-08-2010, 05:05 AM #5
Re: Plastic pallets
Many Thanks. I shall contact them,.
Similar Threads
-
plastic refrigeration fittings?
By chillywilly in forum New TechnologiesReplies: 8Last Post: 14-11-2008, 02:46 PM -
Brown or Black plastic box trunking
By alex242 in forum Air ConditioningReplies: 12Last Post: 07-05-2007, 10:06 AM -
Inner plastic doors
By bernard in forum Supermarket RefrigerationReplies: 2Last Post: 01-07-2005, 10:20 PM -
Storage space between pallets
By Peter_1 in forum IndustrialReplies: 18Last Post: 24-01-2005, 07:38 PM -
Waterflow in plastic tube
By Peter_1 in forum Technical SpeculationsReplies: 3Last Post: 23-04-2004, 01:09 AM