Results 1 to 2 of 2
Thread: R406 application
-
19-08-2010, 10:47 AM #1
R406 application
Hello ....
I wondering if you can help me in the following situation :
we use the refrigerating gas R406A , but not for refrigerating , we use it as blowing agent in foam industry ......
So any one have an idea about the suitable pipe type for this gas , since the required pressuer in the pipe is : 12 bar , also about the pump (outdoor pump)
thanks in advance .....
-
30-09-2010, 09:21 PM #2
Re: R406 application
We use a Van Steemburg recovery system that is slightly modified to flush our refrigeration systems with this. A common blowing agent used these days is R245fA by honeywell.
Similar Threads
-
Compressor question for Low temp R-507 application
By worksalot in forum Industrial CompressorsReplies: 6Last Post: 05-05-2010, 11:44 AM -
size capillary for any application & refrigerant
By benijoseph in forum Technical SpeculationsReplies: 12Last Post: 07-06-2009, 10:00 AM -
Biter Compressor HP, and Application
By fredboer in forum Technical SpeculationsReplies: 1Last Post: 10-12-2008, 12:38 PM -
Job application
By bojan in forum Chit Chat & Service StoriesReplies: 10Last Post: 30-11-2005, 09:41 PM -
Low back pressure compressor application
By Abe in forum Technical DiscussionsReplies: 5Last Post: 31-07-2001, 11:43 PM