Results 1 to 43 of 43

Hybrid View

  1. #1
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    70
    Posts
    4,701
    Rep Power
    47

    Re: Anhydrous Ammonia Leak Detection.

    Soap and bubbles are best at pinpointing the source!
    Whenever I try and use soap and bubbles I find it a wast of time.
    On account of the fact that the water is absorbed to readily by the Ammonia!


    One of my favorites is the old rub the the site of the potential leak and then sniff the hand trick! And that doesn't cost anything!
    Cant stick your hand up to a Say! Leaking Shaft seal.
    Not without stripping Half the drive/ Guards etc off!
    [/QUOTE]

    Sorted now I am glad to say.
    Many thanks Grizzly

  2. #2
    Join Date
    Mar 2008
    Location
    nc
    Age
    54
    Posts
    43
    Rep Power
    0

    Re: Anhydrous Ammonia Leak Detection.

    Quote Originally Posted by Grizzly View Post
    Whenever I try and use soap and bubbles I find it a wast of time.
    On account of the fact that the water is absorbed to readily by the Ammonia!



    Cant stick your hand up to a Say! Leaking Shaft seal.
    Not without stripping Half the drive/ Guards etc off!
    Sorted now I am glad to say.
    Many thanks Grizzly[/QUOTE]
    Grizzly,

    Soap bubbles have never failed me as long as the systems pressure was relatively higher than atmosphere!
    Sure you could discount the usefulness of touching the potential leak and smelling it because it may require some disassembly in about 1 fifth of 1 percent of the system that I have been charged with!

    Heck I would counter that there is no such thing as a perfect leak detection method! How would your sulfer stick do in 50 mile per hour winds? In that case the sniffing your hand trick would work!

  3. #3
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    70
    Posts
    4,701
    Rep Power
    47

    Re: Anhydrous Ammonia Leak Detection.

    Quote Originally Posted by zolimer View Post
    Sorted now I am glad to say.
    Many thanks Grizzly
    Grizzly,

    Soap bubbles have never failed me as long as the systems pressure was relatively higher than atmosphere!
    Sure you could discount the usefulness of touching the potential leak and smelling it because it may require some disassembly in about 1 fifth of 1 percent of the system that I have been charged with!

    Heck I would counter that there is no such thing as a perfect leak detection method! How would your sulfer stick do in 50 mile per hour winds? In that case the sniffing your hand trick would work![/quote]


    Each to their own, as they say.

    I must say I have never tried to leak check in 50 mph winds. (must be big bubbles?)
    The last thing i would be doing is sniffing my hand.
    If you bother to read my post correctly.
    I actually refer to gods own leak detector.
    I just did not where to do the sniffing.
    Grizzly
    Last edited by Grizzly; 21-01-2011 at 06:19 AM.

Similar Threads

  1. Leak Testing?
    By Thana in forum Trouble Shooting
    Replies: 36
    Last Post: 31-08-2010, 02:57 PM
  2. Ammonia Detection Unit
    By thejus123 in forum NH3
    Replies: 10
    Last Post: 28-10-2009, 11:08 AM
  3. Global leak detection
    By AndyO in forum Industrial
    Replies: 2
    Last Post: 11-03-2008, 05:22 PM
  4. Helium for leak detection
    By chemi-cool in forum Refrigerants
    Replies: 51
    Last Post: 08-03-2005, 01:53 PM
  5. Leak detection
    By Reeferjon in forum Trouble Shooting
    Replies: 10
    Last Post: 10-12-2001, 11:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •