Results 1 to 7 of 7
Threaded View
-
09-06-2005, 08:56 PM #1
How to Correctly Size Condensing Unit and Evaporator
Ive worked out a cooling load for two Chiller rooms
The first one , the duty required is 4.32 Kw
The second is 6.29 Kw
What is the correct way to to size the condensing unit and evaporator coil using the wholesalers charts.
This has always been a grey area for me, and Im determined to get it right and learn the proper way to do it.
The third question is, how to I accurately select the orifice for the expansion valve
Thank you in advanceAny opinions, statements and facts expressed in this message do not constitute legal advice in any shape or form and is given for a general outlook in nature. You are advised to seek appropriate and specific professional assistance from a regulated and authorised advisor for definitive advice.
Similar Threads
-
Daikin a/c units.
By rick in forum Air ConditioningReplies: 59Last Post: 18-02-2008, 09:22 PM -
Need a correctly sized valve
By Abe in forum CommercialReplies: 2Last Post: 26-10-2005, 08:42 PM -
Evaporator Concerns-Use of a 30 TOR Unit for a 40 TOR System
By nrps in forum Technical SpeculationsReplies: 9Last Post: 05-07-2004, 11:47 AM -
Selecting Evaporator coil and condensing unit
By Abe in forum Tools and CalculatorsReplies: 7Last Post: 04-04-2003, 03:20 PM -
Matching Evaporator with Condensing Unit
By Abe in forum Technical DiscussionsReplies: 12Last Post: 25-07-2001, 08:57 AM