Results 1 to 2 of 2
  1. 12-08-2010, 01:31 AM #1
    danod's Avatar
    danod
    danod is offline improving poster
    Join Date
    Nov 2008
    Location
    alberta canada
    Posts
    27
    Rep Power
    0

    howden wrv 255 mk5 slide valve



    Cannot find anywhere in the manual on how to remove the slide valve guide block spindle. I have the plug on the bottom out but not sure how to remove the spindle, does it thread out or tap with a hammer?


  2. 12-08-2010, 07:30 AM #2
    RANGER1's Avatar
    RANGER1
    RANGER1 is offline VIP Poster
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,357
    Rep Power
    39

    Re: howden wrv 255 mk5 slide valve

    Tap it out with a soft hammer .

    It will have an alignment pin as guide block pin is eccentric for slide alignment .
« Previous Thread | Next Thread »

Similar Threads

  1. Howden slide valve problems
    By CanadianIce in forum Industrial Compressors
    Replies: 9
    Last Post: 29-06-2010, 04:38 PM
  2. Slide valve wear on Grasso screw after just 54000 Hrs
    By Lodiev in forum Technical Speculations
    Replies: 11
    Last Post: 14-09-2009, 01:21 PM
  3. calibrating slide valve on rxf control pannel
    By marley in forum Industrial
    Replies: 5
    Last Post: 30-08-2009, 06:26 PM
  4. LEV does not open
    By Yuri B. in forum Air Conditioning
    Replies: 7
    Last Post: 19-07-2009, 02:37 PM
  5. FRICK TDSH 233 Slide Valve and guide damaged
    By 404cab in forum Industrial Compressors
    Replies: 9
    Last Post: 30-07-2008, 11:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules