Results 1 to 3 of 3
Thread: Vapour absorption chiller
-
08-08-2010, 01:00 AM #1
Vapour absorption chiller
Hello, Suhail here. We have an absorption chiller of 166 USRT on our site. We are facing problems in it. Two weeks before chiller got leakage in one of evaporator's tube. We contacted the vendor. Representative came to site, leakage rectified. After this maintenance work, we are facing the problem.The problem is that, Chiller starts normally. Steam increase accordingly. When temperature of the generator reaches to 150 degree c, steam flow becomes Zero while steam control valve remains open.
Please help me in this
suhail
-
08-08-2010, 05:07 AM #2
Re: Vapour absorption chiller
If I understand you have troubles with the steam line; you should check the steam trap.
-
30-09-2010, 07:20 AM #3
Re: Vapour absorption chiller
would you please help me to find the Performance curve of your absorption chiller.
I mean the curve which is showing the relation between chilled water, cooling water temprature and cooling capacity.
i am doing some researches for that
Similar Threads
-
Ice rink with Absorption chiller
By mjsnow in forum Technical SpeculationsReplies: 10Last Post: 21-09-2009, 07:08 AM -
Absorption Chiller VS Mech. Chiller
By Intern in forum IndustrialReplies: 20Last Post: 30-05-2009, 08:31 AM -
centrifugal chiller VS absorption chiller
By Masdede in forum Air ConditioningReplies: 3Last Post: 01-03-2009, 12:28 PM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM