Results 1 to 1 of 1
Thread: Mycom Mypro panel problems
-
05-08-2010, 03:00 PM #1
Mycom Mypro panel problems
I have a customer with a Mypro microprocessor. When they put the slide valve control in automatic, the micro re-boots and dumps the RAM memory thereby erasing all setpoints. If run in manual control, there is no issue. I have changed out every component in the panel with exception of the driver board (which is obsolete) and the display screen and the issue still persists. Any ideas or similar experiences?
Similar Threads
-
LG GR642QVP Panel problem
By claguey in forum Trouble ShootingReplies: 3Last Post: 08-09-2010, 12:03 PM -
mycom 4wb unloading problem
By samlee12 in forum IndustrialReplies: 13Last Post: 19-01-2009, 10:21 PM -
Oil Loss 250 VLD Mycom Screw
By Keith1977 in forum NH3Replies: 23Last Post: 20-09-2008, 12:28 PM -
Oversized Liquid Recievers?? Problems??
By nickjh in forum FundamentalsReplies: 12Last Post: 12-06-2007, 07:54 AM -
Oil return problems
By Peter_1 in forum IndustrialReplies: 37Last Post: 23-08-2004, 11:30 PM