Results 1 to 3 of 3
  1. #1
    MikeM439's Avatar
    MikeM439 Guest

    Scotsman CS60 Only 1 Harvest then Stops



    I am not all to familiar to the ice machine game, however, I have a problem with my CS60mas-1a. Everything works fine for one harvest, all presures are perfect....almost as if they were written in the book.

    After the first harvest the unit then begins a new cycle and the low pressure begins to drop, but only to about 60-70psi and the high pressure climbs until it reaches about 370psi and then the hi pressure cut out kicks in and shuts the unit down. It then begins cycling about every minute with the pressures still out of range.

    Any Ideas?



  2. #2
    Join Date
    Aug 2010
    Location
    australia
    Posts
    15
    Rep Power
    0

    Re: Scotsman CS60 Only 1 Harvest then Stops

    hot gas solenoid staying or sticking open?

  3. #3
    MikeM439's Avatar
    MikeM439 Guest

    Re: Scotsman CS60 Only 1 Harvest then Stops

    Thanks for the info...I checked the Hot Gas Valve and it is working fine. I did, however, find that the condenser fan was not always restarting after harvest. It is just a bad fan motor. I quickly repaired the motor and it is working for now. I ordered a new motor, because this one has seen better days. Thanks Again.. Maybe This will help someone else.

Similar Threads

  1. scotsman acm 126 as
    By hm1982 in forum Trouble Shooting
    Replies: 4
    Last Post: 26-06-2010, 09:09 PM
  2. Scotsman sce170 trouble
    By lowenherzig in forum Commercial
    Replies: 3
    Last Post: 11-03-2010, 03:44 AM
  3. QuietCube harvest problem
    By Richvacr in forum Trouble Shooting
    Replies: 2
    Last Post: 22-02-2010, 05:54 AM
  4. Scotsman CS60 no ice
    By docgreen9 in forum Domestic
    Replies: 3
    Last Post: 14-03-2009, 02:45 AM
  5. manitowoc ice machine harvest cycle
    By flyboy3b in forum Trouble Shooting
    Replies: 9
    Last Post: 26-05-2008, 06:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •