Results 1 to 4 of 4
Thread: md2 thermoking
-
01-08-2010, 02:16 AM #1
md2 thermoking
Hi Guys, i am new to this site, and appreciate all the help and advise, i have a thermoking md2 reefer, i have no power with the on/off switch, i do have constant power to the positive terminal on the reefer, this unit hasn't ran in years, any help would be greatly appreciated.
-
01-08-2010, 05:25 AM #2
Re: md2 thermoking
First measure accumulator
next main supply of unit right side 2 and 2A pins
starter 12V-pins, generator 12V pin,
all cable 2 are power supply. it goes on emergency switch( push button).
-
01-08-2010, 08:28 PM #3
Re: md2 thermoking
Thanks, so i have main power goining to the right side of the, power on both sides of the fusible link, i do have powre on the 2a on the circuit board and thats it, i can't get the fuel pump/pre heat or start to energize, when i turn on the switch nothing happens, it has the controll box on bottom and on the reefer, do you have email? thanks for your help
-
02-08-2010, 02:14 AM #4
Re: md2 thermoking
If you are in BC Canada, send me a pm mark@futureclimates.ca
Similar Threads
-
Modify Thermoking Controller
By dbenoit64 in forum Technical DiscussionsReplies: 0Last Post: 26-07-2010, 01:57 PM -
Modify Thermoking controler
By dbenoit64 in forum TransportReplies: 0Last Post: 19-07-2010, 07:28 PM -
Thermoking MRT3-1000 problems
By andybessent in forum Trouble ShootingReplies: 1Last Post: 18-07-2010, 05:57 PM -
Thermoking MD11SR
By Chris2005 in forum TransportReplies: 4Last Post: 18-01-2010, 06:17 PM -
Thermoking Sentry Max II Manual
By Dguzman in forum Refrigeration BooksReplies: 1Last Post: 16-12-2008, 06:47 PM