Results 1 to 5 of 5
Thread: Looking for a tool
-
28-07-2010, 02:21 AM #1
Looking for a tool
Some years ago during my training, I had used a tool for purging systems, especially domestic A/C where people would turn units on their side and oil would seep into the lines.
This tool would allow me to cut a line completely, and by placing this tool over the line; threading together with a gasket between would create a seal that could hold several hundred psi, on the end being a standard fitting to hook up gauges for a nitrogen purge.
Anyone ever use one, know about it, what its called? Ive tried several searches online but cant find anything that resembles them. Came as a kit for all common pipe sizes.
Thanks
-
28-07-2010, 11:14 AM #2
Re: Looking for a tool
Line tap valves, perhaps?
Tony
-
28-07-2010, 09:41 PM #3
Re: Looking for a tool
Not a line tap, it would slide over the end of any size line; copper/steel. Threading together the coupling would compress a rubber gasket that would seal onto the line.
-
19-08-2010, 03:33 AM #4
Re: Looking for a tool
It is called a process tube adapter kit made by Robinair Part # 12458
-
13-09-2010, 04:08 AM #5
Re: Looking for a tool
Thank you sir! Been lookin for these for years. Dummies at every supplier ive asked had no idea.
Similar Threads
-
Design youre own tool
By Latte in forum Chit Chat & Service StoriesReplies: 19Last Post: 23-03-2010, 10:35 PM -
zanurssi sevice tool
By paulwild in forum CommercialReplies: 0Last Post: 18-09-2009, 09:45 AM -
Programming tool for PC03 Controllers from carel
By hank12 in forum Tools and CalculatorsReplies: 2Last Post: 27-07-2009, 10:03 PM -
I need a tool which may not exist please help!
By conair chris in forum Tools and CalculatorsReplies: 5Last Post: 30-01-2009, 04:08 PM -
Daikin VRV diagnostic tool
By icecube51 in forum Tools and CalculatorsReplies: 11Last Post: 25-11-2008, 06:27 PM