Results 1 to 1 of 1
Thread: Manitowoc E400 help needed
-
26-07-2010, 03:43 AM #1
Manitowoc E400 help needed
Hi - sorry if I posted this in the wrong forum, if the mods need to move it - that's fine.
I co-own a Manitowoc E400 (air cooled) ice machine with a neighbor. Recently it stopped working for unknown reason.
Neighbor thought it was the "start relay" (bolted inside back cover of machine) - so he tried to replace it.
except that he did not mark the wires and now we can't get it to work.
the previous owner had the machine wired to be used with a timer - so that is not helping in my attempt to get the machine going again. The timer wires are spliced in at a couple of places in the machine. I have a manual, but with the timer wires it makes following the wiring diagram difficult.
anyone familiar with this machine that could help me figure out what wires go where?
Thanks!
Similar Threads
-
Manitowoc ice machine
By Andy AC in forum CommercialReplies: 4Last Post: 23-04-2010, 09:14 AM -
locate aftermarket compressor 4a Q600 Manitowoc ice machine
By iceman6108 in forum CommercialReplies: 0Last Post: 11-03-2010, 04:07 AM -
Autocascade refrigeration system: design verification needed
By DaBit in forum Technical SpeculationsReplies: 3Last Post: 07-02-2010, 07:48 AM -
Manitowoc Q series Ice Machine
By JerryG in forum Trouble ShootingReplies: 8Last Post: 12-05-2009, 01:57 PM -
Smart/As needed evap defrost?
By dkemper in forum FundamentalsReplies: 6Last Post: 27-10-2008, 07:25 PM