Results 1 to 1 of 1
-
20-07-2010, 01:49 PM #1
Temp problem with a seimens ref/freezer r600
after adding some gas in the unit the freezer (no frost) started to fill and frost normally but the fan is not working i unclamped the fan and gave it direct power and it worked fined. I called the manufacturer and they were very helpful NOT! asked about the problem and was given many answers but not what to check for. Now this freezer compartmen works at a temp at -7C but after a few hours the temp goes normal at -18c and back again to a normal-7c. the door has a magnet sensor for the fan i assume tried to put a magnet on it but nothing. Any suggestions would be greatly apriciated.
Similar Threads
-
Defrost Problem
By Mahmoud in forum FundamentalsReplies: 40Last Post: 19-10-2007, 10:15 PM -
Problem with ducted Daikin
By jutty in forum Trouble ShootingReplies: 8Last Post: 23-07-2007, 05:34 AM -
capacity problem
By Kathleen in forum Trouble ShootingReplies: 22Last Post: 15-01-2003, 03:13 PM -
Engineering problem? Hmmmmm
By bernie in forum Trouble ShootingReplies: 71Last Post: 26-06-2002, 03:52 PM