Results 1 to 10 of 10
-
19-07-2010, 07:36 PM #1
improving poster
- Join Date
- Sep 2009
- Location
- Idaho
- Posts
- 27
- Rep Power
- 0
Help with finding small NH3 Compressor
I would like to find a small compressor that is rated for use with ammonia. 1 to 2 ton, or <10 hp would be very suitable.
I know a couple of you guys are equipment dealers/salespeople so help me out if you can or know any information...
Thanks in advance.
-
19-07-2010, 10:00 PM #2
regular poster
- Join Date
- May 2009
- Location
- Sydney
- Posts
- 73
- Rep Power
- 15
Re: Help with finding small NH3 Compressor
Have you looked at Bitzer?
-
20-07-2010, 11:25 AM #3
Veteran Poster
- Join Date
- May 2006
- Location
- India
- Age
- 74
- Posts
- 399
- Rep Power
- 18
Re: Help with finding small NH3 Compressor
Try bock nh3 compressors
-
20-07-2010, 11:26 AM #4
Veteran Poster
- Join Date
- May 2006
- Location
- India
- Age
- 74
- Posts
- 399
- Rep Power
- 18
Re: Help with finding small NH3 Compressor
SEND ME A PM ON : ddk0123@gmail.com
-
22-07-2010, 05:02 AM #5
regular poster
- Join Date
- Jul 2005
- Location
- USA
- Age
- 61
- Posts
- 68
- Rep Power
- 19
Re: Help with finding small NH3 Compressor
Blackmer makes a couple of models that are used on tank trucks. And Howe makes a few air cooled recips.
-
24-07-2010, 11:46 AM #6
improving poster
- Join Date
- Sep 2009
- Location
- Idaho
- Posts
- 27
- Rep Power
- 0
Re: Help with finding small NH3 Compressor
Thanks, much everybody.
-
24-07-2010, 02:38 PM #7
improving poster
- Join Date
- Sep 2009
- Location
- Idaho
- Posts
- 27
- Rep Power
- 0
Re: Help with finding small NH3 Compressor
Ok,
I have found a little compressor that interests me, Bock model F2 nH3.
Any similar equipment to this by other manufacturers that you know of?
Any absorbtion systems of similar capacity to what is being talked about...?
-
24-07-2010, 05:03 PM #8
Moderator
Site Moderator : and general nice guy
- Join Date
- Oct 2003
- Location
- Belgium
- Age
- 62
- Posts
- 5,630
- Rep Power
- 34
Re: Help with finding small NH3 Compressor
Tried Frigopol of Austria once?
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
24-07-2010, 09:46 PM #9
improving poster
- Join Date
- Sep 2009
- Location
- Idaho
- Posts
- 27
- Rep Power
- 0
Re: Help with finding small NH3 Compressor
Anyone on the forums a BOCK salesperson?
-
03-10-2010, 10:08 AM #10
Veteran Poster
- Join Date
- May 2006
- Location
- India
- Age
- 74
- Posts
- 399
- Rep Power
- 18
Re: Help with finding small NH3 Compressor
SEND ME A PM ON ddk0123@gmail.com for F-2 data
Similar Threads
-
Suction gas <-> liquid line heat exchange and performance gains
By DaBit in forum Technical SpeculationsReplies: 30Last Post: 18-05-2010, 01:52 PM -
Compressor failure galore
By frankv1@maltane in forum Trouble ShootingReplies: 3Last Post: 21-08-2009, 07:50 PM -
Compressor (small) brazing guide
By nike123 in forum CommissioningReplies: 6Last Post: 02-04-2009, 09:54 PM -
Different between compressor MYCOM single stage and compressor booster
By thien nhat in forum CommercialReplies: 7Last Post: 13-12-2007, 06:31 PM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM
