Results 1 to 2 of 2
Thread: SHINING KFR-70GW troubleshooting
-
17-07-2010, 08:28 AM #1
SHINING KFR-70GW troubleshooting
Hi guys,
I am new to the AC repair business so bare with me a bit ^_^
I recently changed the circuit board of a SHINING KFR-70GW as the old one had a short and part of it got carbonized.
When I changed the board, I checked all the wiring and connections; however the unit only worked for 10 mins after switching it on. I then reset it from the indoor unit and it worked for another 30 mins before shutting down by itself. It still is switching off after approx 30 mins.
The indoor unit has a green LED blinking, but I don't have the service manual and I couldn't find one on the net so I don't know exactly what this means.
Any suggestions from past experiences or help would be greatly appreciated guys
-
17-07-2010, 08:31 AM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,175
- Blog Entries
- 6
- Rep Power
- 36
Re: SHINING KFR-70GW troubleshooting
Last edited by nike123; 17-07-2010 at 08:34 AM.
Similar Threads
-
Troubleshooting 12 volt Danfoss BD compressors.
By RLK in forum Trouble ShootingReplies: 0Last Post: 01-07-2010, 11:14 PM -
need troubleshooting charts
By mcm12263 in forum New to REReplies: 1Last Post: 13-05-2009, 10:19 PM -
troubleshooting books
By marc5180 in forum Refrigeration BooksReplies: 42Last Post: 04-04-2009, 06:08 PM -
Troubleshooting a vacuum pump and gauge set.
By Old Codger in forum FundamentalsReplies: 7Last Post: 08-08-2008, 05:13 PM -
shining kfr50 qw fault ??? Help!
By mowbrey77 in forum Air ConditioningReplies: 13Last Post: 24-06-2008, 10:46 AM