Results 1 to 32 of 32

Hybrid View

  1. #1
    Join Date
    Apr 2008
    Location
    UK
    Posts
    215
    Rep Power
    17

    Re: help frascold a17y

    Hi njb, it's a bit far for me to travel to be honest..
    Monkey's offer is a good one though, i'd snatch his hand off if i were you

    Reminded me of this thread-
    http://www.refrigeration-engineer.co...ad.php?t=25774

    Good luck !

    Ginge

  2. #2
    Join Date
    Jul 2010
    Location
    uk
    Age
    57
    Posts
    15
    Rep Power
    0

    Re: help frascold a17y

    hi, would ideally like to find someone local as we buy and sell fridge vans, know the basics but thats it, where abouts are you, as i said i do not mind travelling, just concerned that if he comes down then needs to order parts and come back again it will not be a viable fix, thanks nigel

  3. #3
    Join Date
    Apr 2008
    Location
    UK
    Posts
    215
    Rep Power
    17

    Re: help frascold a17y

    You really need someone local to make it viable & i am really miles away
    There's a lot of people on here willing to help though, you just might need to be a little patient..

    Has Monkey said it's too far for him ??

    Ginge

  4. #4
    Join Date
    Jul 2010
    Location
    uk
    Age
    57
    Posts
    15
    Rep Power
    0

    Re: help frascold a17y

    no, he is willing to travel, but my concern is that if he travels all this way to say it needs a part ordering the cost of him coming back to fix will be to much, someone on here has got to know someone local to us, we have another question if you dont mind, we have a hubbard 460 unit with no 240 volt standby, the compressor is engine driven, is there any way we can take this off to run via a 240 volt or 12 volt motor so when its standing at a show we dont have to keep the engine running, thanks nigel

  5. #5
    Join Date
    Sep 2008
    Location
    Portsmouth,England
    Age
    60
    Posts
    46
    Rep Power
    0

    Re: help frascold a17y

    Sorry am I not reading right, or do you lot already know NJBs location?
    If it wthin 25 miles of J11 M27 I will have a look for you.

  6. #6
    Join Date
    Jul 2010
    Location
    uk
    Age
    57
    Posts
    15
    Rep Power
    0

    Re: help frascold a17y

    hi we are in lincoln, think some of you should move to this area, because no one here knows what they are talking about, all we have been told for the last 3 days by local experts is that r22 is banned making it unfixable, so they wont even come and look at it, does not matter that it may only be a switch that is faulty,

  7. #7
    Join Date
    Apr 2008
    Location
    UK
    Posts
    215
    Rep Power
    17

    Re: help frascold a17y

    He's outside Lincoln- post 12

    Any takers ???
    Last edited by Gingerair; 09-07-2010 at 11:18 PM. Reason: Moving to Skegness...

  8. #8
    Join Date
    Sep 2008
    Location
    Portsmouth,England
    Age
    60
    Posts
    46
    Rep Power
    0

    Re: help frascold a17y

    I will read a bit more carefully next time. Sorry lincoln is a bit out of my range.

Similar Threads

  1. Frascold screw vibration
    By chilled kiwi in forum Technical Discussions
    Replies: 13
    Last Post: 06-06-2010, 01:30 PM
  2. Frascold screw compressor - axial clearance
    By UrazovS in forum Trouble Shooting
    Replies: 0
    Last Post: 17-08-2009, 04:55 PM
  3. frascold compressor fault
    By chillyblue in forum Commercial
    Replies: 14
    Last Post: 03-07-2009, 08:15 AM
  4. Where to get Frascold gaskets?
    By monkey spanners in forum Commercial
    Replies: 21
    Last Post: 28-02-2009, 11:35 PM
  5. frascold compressor out of oil
    By DEVIL in forum Trouble Shooting
    Replies: 7
    Last Post: 25-07-2007, 06:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •