Results 1 to 7 of 7
Thread: Industrial plant maintenance
-
09-07-2010, 12:22 AM #1
Industrial plant maintenance
Manufacturers of compressors used on large airconditioning or industrial plant require that their products are regularly inspected for wear.
Could some describe the maintence checks one would do on such a plant after
5000 hours or one year
10,000 hours
20,000 hours
any help would be appreciated as i seldom work with larger plant.
-
09-07-2010, 07:20 PM #2
Re: Industrial plant maintenance
You must be specific.
-
09-07-2010, 10:21 PM #3
Re: Industrial plant maintenance
Sabroe have the best advice on this in their recip & screw manuals .
You need
-plant conditions
-speed
-refrigerant type
-type of compressor ie industrial or commercial
-
12-07-2010, 02:22 AM #4
Re: Industrial plant maintenance
I dont have any specific data, this is a question for one of my trade papers, I asked the Senior techs at work and went through a few manuals but still dont really have what i require.
-
18-07-2010, 03:56 AM #5
Re: Industrial plant maintenance
The manufacturers manuals will detail a normal maintenance schedule for the type compressor you use.
Ken
-
22-07-2010, 02:39 PM #6
Re: Industrial plant maintenance
Yup.,usually you can see a detailed maintenance schedule on every OEM's manuals, but it really depends on what type of maintenance evolution your plant is practicing (e.g. preventive, predictive or Pro-active maintenance?.)
For preventive in screw comps.,every 6k hrs or 1 yr. whichever comes first, we usually change oil & oil filter and checks the main drive coupling alignment.
Every 15k hrs. or so, you can check the mech'l. seals of both comp. and oil pump for wear.
Every 25k hrs. or 5 yrs. whichever comes first, you can check the thrust bearings, slide valve guide block and PTFE seals and replace when necessary.
On the other side, correct operation and daily maintenance checks will make your comps. more reliable.<"No one is so smart, they just stay with problems longer and use their imagination">
-
28-07-2010, 07:36 AM #7
Re: Industrial plant maintenance
thanks ref717 for your response.
the maintenance is predictive
Similar Threads
-
Few question about Mitsubishi Heavy Industrial air condition
By fireduck in forum Air ConditioningReplies: 55Last Post: 12-05-2009, 02:35 PM -
Industrial to Commercial
By geoffg in forum CommercialReplies: 3Last Post: 24-08-2008, 04:46 PM -
Cop Of Brine Plant And Chilled Water Plant
By patilvasudeo in forum FundamentalsReplies: 2Last Post: 16-07-2008, 06:43 AM -
small split maintenance charges
By chillymatt in forum Air ConditioningReplies: 1Last Post: 20-01-2008, 07:44 PM -
Soap Plant Load Calculations
By tjk2007 in forum FundamentalsReplies: 0Last Post: 25-11-2007, 05:59 AM