Results 1 to 3 of 3
Thread: Oil Temperature -Trane Chiller
-
30-06-2010, 05:13 AM #1
Oil Temperature -Trane Chiller
Dear all
We are having Centrifugal Water Chiller of Trane using HCFC -123 as the refrigerant . We are facing a problem with the Oil Heater. The temp is not raising above 90 F it should be above 140 F.We tried replacing the heater but still didnt worked , Checked the thermowell .Everything is working fine except the Oil temp . What could be the possible reason for this
-
30-06-2010, 07:49 AM #2
Re: Oil Temperature -Trane Chiller
I had a similar problem on an older carrier centrif - it turned out to be the thermostat.
-
01-07-2010, 05:05 PM #3
Re: Oil Temperature -Trane Chiller
hi u should check the settings of the controller.it might be set to low!!!as said before.
and make sure when unit is stopped that there is no water flow through the condenser.
good luckLast edited by goshen; 01-07-2010 at 05:16 PM.
THE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!
Similar Threads
-
Trane chiller Training
By sefuss in forum TrainingReplies: 0Last Post: 26-05-2010, 05:01 PM -
Trane chiller HP fault
By Kirky in forum Air ConditioningReplies: 7Last Post: 19-05-2010, 08:39 PM -
Trane chiller problem
By dannycool in forum Air ConditioningReplies: 6Last Post: 08-04-2010, 11:31 PM -
NVQ 3 online test
By Burrah Boy in forum TrainingReplies: 7Last Post: 28-10-2009, 08:35 PM -
Trane CVHE 450 R11 Centrifugal Chiller
By albertjoseph in forum Air ConditioningReplies: 4Last Post: 06-10-2008, 03:23 PM