Results 1 to 6 of 6
Thread: R404A Pipe sizing
-
28-04-2005, 12:33 AM #1
R404A Pipe sizing
Hi guys,
Looking for any info I can get on pipe sizing for R404A. Any help would be greatly appreciated.
Thanks in advance,
Dave
-
28-04-2005, 06:29 PM #2
Re: R404A Pipe sizing
You can get the data from the ASHRAE Handbook or go onlline and down load the Sporlan program. It has line sizing data as well.
Ken
-
28-04-2005, 07:19 PM #3
Re: R404A Pipe sizing
Hi Ken,
Can you get the exact web address of the Sporlan program?
I couldn't find anything like that on their web site.
Chemi
-
28-04-2005, 08:19 PM #4
Re: R404A Pipe sizing
Or register at any Danfoss site and Download Dircalc.
And why not use the free Coolpack for this?It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
28-04-2005, 10:36 PM #5
Re: R404A Pipe sizing
Originally Posted by Industrial tech
HTTP://www.koeltechniek.nl.tt
Follow link DOCUMENTATIE
New screen opens, under categorieen select section download.
You will find several usefull uttilities
Have fun,
Victor
-
04-02-2006, 05:09 PM #6
Re: R404A Pipe sizing
I use a Heatcraft Engineering Manual given to me by a good wholesale counter guy at CDJones. Here's a phone# for Heatcraft: 1-800-334-1616
Similar Threads
-
Pipe Sizing
By dallan in forum FundamentalsReplies: 6Last Post: 16-12-2010, 08:39 PM -
capillary sizing for R404a
By ding in forum Technical SpeculationsReplies: 8Last Post: 19-03-2008, 07:27 PM -
Compressor sizing using R404a
By PCL in forum RefrigerantsReplies: 4Last Post: 14-08-2006, 11:09 PM -
Sizing for Australia
By dogma in forum FundamentalsReplies: 5Last Post: 17-03-2006, 10:05 AM -
Hot gas pipe sizing
By MarcoM in forum FundamentalsReplies: 1Last Post: 12-09-2003, 03:40 PM