Results 1 to 4 of 4
Thread: cascade systems
-
24-06-2010, 05:15 PM #1
cascade systems
hie guys
need to have 1 compressor for 2 coldrooms operating at between 0 - 5 degree C.how do i design the control circuit and the connection of the 2 evaporators and the 2 condensors.also the back pressure, using R404a gas.
thanks
-
24-06-2010, 08:32 PM #2
Re: cascade systems
Cascade systems are extremely difficult, even for someone with a lot of experience.
Seeing your questions, you don't have experience so don't start with it before you understand the basics.
And why a cascade for -5°C, what will be your other gas you will use?Last edited by Peter_1; 30-06-2010 at 06:06 AM.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
30-06-2010, 12:46 AM #3
Re: cascade systems
Why 2 condensers? More importantly why a cascade for a -5 system; too complex!
-
30-06-2010, 06:07 AM #4
Re: cascade systems
donrtc, see you left this thread without saying anything... not so polite
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
Similar Threads
-
Vrv
By tgoonter in forum Air ConditioningReplies: 4Last Post: 11-01-2011, 06:25 AM -
Help on cascade systems
By marc5180 in forum TrainingReplies: 17Last Post: 01-10-2009, 04:31 PM -
cascade systems
By GHAZ in forum CommercialReplies: 1Last Post: 12-04-2007, 10:42 PM -
Refrigerant for multi-stage and cascade systems
By lraja in forum RefrigerantsReplies: 0Last Post: 15-01-2007, 01:27 AM