Results 1 to 7 of 7
Threaded View
-
21-06-2010, 04:46 PM #1
Phase change project - need advice.
Hello,
I am currently using a phase change CPU cooling system.
My current compressor and condenser is good for about 250 watts.
I am upgrading CPU's to a setup that will require upwards of 500 watts of cooling (possibly more).
I also want to run a 220v-240v compressor for power consumption reasons.
I was thinking about this setup:
Danfoss SC12G
A new 17" x 16" condenser and 12v fan from a BMW e36.
I figure my condenser should be able to shed up to 1500 watts.
This compressor says r143a, but is there a better choice?
Am I on the right track?
Suggestions?
Thanks!
Similar Threads
-
Three phase motors (project)
By zeevalentino in forum ElectricalReplies: 4Last Post: 10-03-2010, 04:16 AM -
Capillary Tube Characteristics
By Chef in forum FundamentalsReplies: 9Last Post: 10-03-2009, 02:03 PM -
Career Change Advice. R&D to Installation.
By artie fufkin in forum TrainingReplies: 1Last Post: 31-08-2008, 06:45 PM -
CO2 phase change video
By US Iceman in forum CO2Replies: 29Last Post: 12-04-2008, 12:52 PM -
SR2 50 models electric SBY diagonostics made simple
By absolute-zero in forum TransportReplies: 5Last Post: 04-01-2008, 06:11 PM