Results 1 to 6 of 6
-
20-06-2010, 04:19 AM #1
Haier HSU 12HF03 Temperature Problem
Hello: I am having problems with my high wall Haier heat pump. When I turn on the unit first thing in the morining the vent opens up but no heat comes out and the power LED blinks. After a couple of hours when the outside and inside temperature has increased the unit will operate perfectly.
Output temp when running normally is 50 deg celcius
Outside Temp in the mornings is approx 0-2 deg celcius
I have no manuals or paper work for this unit.
where should I start for troubleshooting for this problem. Thermisistor? Reversing valve? *****?
-
20-06-2010, 06:48 AM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Haier HSU 12HF03 Temperature Problem
*****!...........
-
20-06-2010, 12:02 PM #3
Re: Haier HSU 12HF03 Temperature Problem
Sorry I was meaning Gas (refrigerant)
-
20-06-2010, 01:41 PM #4
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Haier HSU 12HF03 Temperature Problem
I mean that you should start with checking correct refrigerant charge.
-
21-06-2010, 12:03 AM #5
Re: Haier HSU 12HF03 Temperature Problem
I have a small problem with that at the moment, the service valve on the unit is set back inside then frame of the unit and I can not connect my hose to the service valve. But I suspect it is ok because when it does work the unit puts out a constant 52 degres.
-
21-06-2010, 12:08 AM #6
Re: Haier HSU 12HF03 Temperature Problem
Thats 52 deg Celcius (125 F )
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
Great problem........
By Bashir01219 in forum FundamentalsReplies: 86Last Post: 05-03-2011, 10:56 AM -
Thermo King OptiSet
By REEFER-TEK in forum TransportReplies: 4Last Post: 06-12-2007, 07:23 PM -
Article in ACH&R News
By Gary in forum FundamentalsReplies: 8Last Post: 20-05-2003, 12:27 AM -
TEV with MOP: how to keep valve body temp above bulb temp?
By DaBit in forum FundamentalsReplies: 5Last Post: 16-10-2002, 12:38 AM