Panasonic U-100X1HPK

[Admiral]

Has anyone had a problem with the compressors on a Panasonic U-100X1HPK
We have a problem with no fault codes or Led faults, but the compressor with only run for 10 sec's or sometimes up to a minute before shutting down, going through its start up sequence and starting again etc

Any help would be great

[Brian_UK]

Does it do this continually or will it stop after so many starts?

[Admiral]

Thanks for replying, it seems to keep going, although I can't be sure as we kept trying things to see if we could get it going.
The unit has had a new PCB (main) fitted along with coil, ambient sensors recently.

[Brian_UK]

I ask because it could be stopping on a safety switch/sensor. Sometimes these systems will keep resetting themselves so many times on a particular problem and then shut down with a fault code given.

Obviously, every time that you reset the power the fault history is lost.