Results 1 to 3 of 3
Thread: Bitzer HSKC oil change.
-
09-06-2010, 10:03 PM #1
Bitzer HSKC oil change.
Hi all,
I have a question. I would like to know/learn how to do an oil change on a bitzer screw compressor. I have never done this procedure before especialy because the oil is on the high pressure/discharge side of the compressor.
The pump down into the condenser doesn't work really well in this case I assume.
Any tips would be really helpfull.
Thanks.
-
10-06-2010, 07:26 AM #2
Re: Bitzer HSKC oil change.
Yeah, pump down, close the valves, recover the refrigerant for as much as possible, drain the oil from the separator, change the oil filter, evacuate the compressor and while keeping the vacuum pump running, use the pressure difference for sucking the oil into the compressor separator.
-
10-06-2010, 03:29 PM #3
Similar Threads
-
Bitzer s6f30 2-stage compressors
By JONAH in forum Technical DiscussionsReplies: 25Last Post: 27-10-2010, 07:27 AM -
Bitzer CSH8561-125Y oil sight glass
By Peter_1 in forum IndustrialReplies: 40Last Post: 26-05-2010, 04:32 PM -
Basics or is it?
By Fett in forum FundamentalsReplies: 17Last Post: 10-09-2009, 01:45 AM -
Rewiding Stator Bitzer Hskc 7461-80
By nanev in forum ElectricalReplies: 1Last Post: 01-09-2008, 07:32 PM -
nitrogen presure/ tempurature change.
By neil74 in forum FundamentalsReplies: 5Last Post: 06-03-2008, 10:25 PM