Results 1 to 5 of 5
Thread: Sabroe- Aerzen VMY
-
09-06-2010, 06:40 PM #1
Sabroe- Aerzen VMY
Hi all
Had an enquiry today regarding what i think is 2 Sabroe units with Aerzen VMY 236ME screws on.
As i understand it these were used on early Sabroes, can anyone shine any light on this or even forward any documentation through that might be useful..
Appreciate any info that could help.
Thanks in advance..
Ranga..
I love working on 30 year old kit..
-
09-06-2010, 11:55 PM #2
Re: Sabroe- Aerzen VMY
Until about 1993, The biggest screw made by Sabroe was a 163. In about ,93/94 they produced a 202mm. Anything bigger of that age or older would be an Aerzen compressor
-
10-06-2010, 12:07 AM #3
Re: Sabroe- Aerzen VMY
Hi Charlie
Thanks for you reply, havn't actually seen these units yet but think they're from the early 80's, not sure what to expect & a little before my time i'm afraid..
Do you know roughly what time sabroe brought out the Unisab II ?
-
15-06-2010, 12:22 AM #4
Re: Sabroe- Aerzen VMY
Unisab II was first produced about 1994, or maybe 1993.
Last edited by charlie n; 15-06-2010 at 12:31 AM.
-
15-06-2010, 12:32 AM #5
Re: Sabroe- Aerzen VMY
Thanks for posting Charlie, far as i can gather it's got an early ver unisab II. Presuming it's had some sort of 'refit' at some point. Still not seen it yet..
Similar Threads
-
Sabroe SMC100 broken valve plates
By RANGER1 in forum Trouble ShootingReplies: 44Last Post: 03-12-2009, 10:31 PM -
sabroe plate freezer
By samlee12 in forum IndustrialReplies: 0Last Post: 25-11-2009, 11:48 PM -
Sabroe compressor
By ibraheem in forum Technical SpeculationsReplies: 1Last Post: 12-07-2009, 02:07 PM -
Vibration Dampers on Sabroe Compressors
By kelvin_27_84 in forum Industrial CompressorsReplies: 2Last Post: 11-05-2008, 05:55 PM -
sabroe water chiller
By dill in forum Air ConditioningReplies: 0Last Post: 17-12-2006, 07:26 PM