Results 1 to 2 of 2

Thread: R22 -r507

  1. 07-06-2010, 07:28 AM #1
    country boy's Avatar
    country boy Guest

    R22 -r507



    Does any one have any information / experience on retrofitting a large pumped liquid R22 system, (5000kg) with R507?


  2. 07-06-2010, 08:01 AM #2
    Fri3Oil System's Avatar
    Fri3Oil System
    Fri3Oil System is offline Senior Poster
    Join Date
    Dec 2009
    Location
    Spain
    Age
    45
    Posts
    229
    Rep Power
    15

    Re: R22 -r507

    Hi Country boy,

    I could send you a report on a hypermarket retrofit from R22 to R404A, which is "the same" thing than R507.
    Should you like to have it, please ask.
    The retrofit was carried out in 14hours, cleaning the circuits and extracting all MO.
    R22 was recycled for its later reuse, regarding E.R.1005/2009.

    Regards,

    Nando.
« Previous Thread | Next Thread »

Similar Threads

  1. R507 instead R404a?
    By Friobernal in forum Refrigerants
    Replies: 49
    Last Post: 09-04-2011, 12:42 AM
  2. R507 in an R134a compressor: any danger?
    By DaBit in forum Technical Speculations
    Replies: 30
    Last Post: 21-12-2009, 12:44 AM
  3. [Autocascade] Only a project ATM
    By before in forum CPU Overclockers
    Replies: 1
    Last Post: 07-05-2009, 11:13 AM
  4. R507 in an R134a compressor: system design
    By DaBit in forum Technical Speculations
    Replies: 17
    Last Post: 01-05-2003, 09:25 AM
  5. Effect on design evaporator by using R507 instead of R22
    By lappee in forum Refrigerants
    Replies: 2
    Last Post: 18-09-2001, 05:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules