Results 1 to 3 of 3
Thread: help needed
-
29-05-2010, 08:40 AM #1
help needed
Hi all, hope you can help me?
I have a fridge freezer that only required a defrost heater and 2 new door gaskets, fitted those parts now only half the evaporator freezes up.
i flushed the system and found that there was alot of oil mixed with the flushing liquad, fitted a new drier and recharged the unit (134a), after 2 days the same thing happens again , only half the evaporator freezes up, could the compressor be faulty?
-
29-05-2010, 03:33 PM #2
Re: help needed
have you checked it for leaks?
is it reaching temp?
are the door seals correct?
-
29-05-2010, 06:01 PM #3
Re: help needed
yip gaskets ok
no leaks
temp in freezer -18 and 9 in fridge
Similar Threads
-
Autocascade refrigeration system: design verification needed
By DaBit in forum Technical SpeculationsReplies: 3Last Post: 07-02-2010, 07:48 AM -
Smart/As needed evap defrost?
By dkemper in forum FundamentalsReplies: 6Last Post: 27-10-2008, 07:25 PM -
Horsepower needed for 20 ton icemaker
By claude11 in forum NH3Replies: 2Last Post: 25-10-2007, 12:00 AM -
Carrier 40GKX028 service manual needed
By Ireland in forum Air ConditioningReplies: 6Last Post: 08-02-2007, 07:06 PM -
How many small strands needed to equal pipe pressure drop?
By DaBit in forum FundamentalsReplies: 17Last Post: 25-08-2003, 09:56 PM