Results 1 to 4 of 4
Thread: Clint Chiller Problem
-
25-05-2010, 09:06 PM #1
Clint Chiller Problem
I have a problem with a clint chiller , have a ech 200 controller and i must calibrate the inlet and outlet value of the sensor but i need a pass for that controller.I know which one of the parameter is thet offset but i cannot access it because i don`t have the pass. The pass is no`t 47,13. Please help me!
-
25-05-2010, 11:24 PM #2
Re: Clint Chiller Problem
Does this manual help at all?
http://www.tpiab.com/res/Invensys/ec...leeng62002.pdfBrian - Newton Abbot, Devon, UK
Retired March 2015
-
26-05-2010, 06:48 AM #3
Re: Clint Chiller Problem
I have that manual but is no pass inside. Thank you Brian.
-
26-05-2010, 11:22 AM #4
Re: Clint Chiller Problem
Just contact info (at) clint.it or contact me privately. You may also contact company FALKOR in your country falkor (at)falkor.ro
Similar Threads
-
problem with multistack chiller
By bright in forum RefrigerantsReplies: 3Last Post: 30-10-2010, 10:43 PM -
Carrier chiller basic board problem
By noushad123 in forum Trouble ShootingReplies: 25Last Post: 17-06-2010, 06:55 AM -
Problem with centrifugal chiller
By engalmohannad in forum CommercialReplies: 0Last Post: 19-04-2009, 10:00 PM -
York YK Chiller Problem
By icebox in forum Refrigeration BooksReplies: 13Last Post: 01-07-2008, 06:05 PM -
Chiller tripping Problem
By bhasadu in forum Trouble ShootingReplies: 0Last Post: 21-06-2008, 09:12 AM