Results 1 to 3 of 3
-
22-05-2010, 03:34 PM #1
Overhauling two SULLAIR B32 screw compressors.
Hi guys i am currenly busy overhauling two sullair b32 screw compressors. i am also taking pics as progressing with it to put together a thrus bearing replacemand manual if this is succesful.
Will ceep u posted.
-
25-05-2010, 03:38 PM #2
Re: Overhauling two SULLAIR B32 screw compressors.
Well it seems i met the right people now thanks to RE.
Harry Skoczek and Dan Mroz.
I wel keep u posted on the tricks and mabe if RE permits it i wil place a link so that u all can get it.
-
26-05-2010, 03:29 PM #3
Re: Overhauling two SULLAIR B32 screw compressors.
I installed the new thrust bearings witch a local bearing supplier suplied me with and i am getting a axial flaod on the rotors of 0.0008" or 0.02mm
Can this be right?
Similar Threads
-
Screw Compressors
By casaoui in forum Industrial CompressorsReplies: 1Last Post: 10-09-2009, 04:50 AM -
Compressors - screw or reciprocating?
By Josip in forum Industrial CompressorsReplies: 18Last Post: 27-01-2009, 10:36 PM -
Spare parts and service for Gram screw refrigerant compressors
By i_borisov in forum Technical SpeculationsReplies: 6Last Post: 09-11-2008, 05:25 PM -
FES screw compressors
By negmy13 in forum Technical SpeculationsReplies: 0Last Post: 08-08-2008, 07:40 AM -
reciprocating compressors vs screw, for NH3
By lraja in forum IndustrialReplies: 15Last Post: 04-03-2007, 02:30 AM