Results 1 to 7 of 7
Thread: Fosters Cabinet
-
06-05-2010, 07:42 PM #1
Fosters Cabinet
Those Foster cabinet have sharp edges don't they
Managed to poke a nice hole in my arm on one today, luckily i had my Mr Men plasters on the van
I was trying to get the cover of the L'unite compressor relay box but the drain pan was flush with the front of it, and the screws were hidden behind the pan. Had to prize the lid open and undo the screws holding the box down so i could get the lid off to replace the start cap.
Thought i was finished then noticed the compressor charging stub was oily and had in fact fractured due to it vibrating when the comp is running.
Makes you wonder who designs these things
Jon
-
06-05-2010, 08:45 PM #2
Re: Fosters Cabinet
Fosters aint so bad.... i almost lost my hand last time i went near a husky!
-
06-05-2010, 09:14 PM #3
Re: Fosters Cabinet
I like Fosters stuff, just don't work on enough of it to remeber how they all comes apart and go back together, I don't much like husky and the time they take to pay....
Fullwood milk tanks are the best for cuts, you can never change a water pump on one without looking like you've been self harming
Jon
-
06-05-2010, 09:16 PM #4
-
07-05-2010, 09:22 AM #5
Re: Fosters Cabinet
Yeah fosters cabinets are made by gillette. Iv been on the recieving end far to many times now.
Williams pah lol :P
-
07-05-2010, 11:32 AM #6
-
09-05-2010, 10:41 PM #7
Re: Fosters Cabinet
If you think husky and foster are bad, try going near one of the earlier scotsman icemakers - bloody lethal they were!
Similar Threads
-
Williams Gem Dairy cabinet Condensing unit size Needed
By Chris2005 in forum CommercialReplies: 2Last Post: 22-04-2010, 09:58 PM -
Glass Sandwich Display Cabinet
By Windsor123 in forum Trouble ShootingReplies: 4Last Post: 12-10-2009, 01:28 AM -
4 doors Freezer cabinet not cold !
By oilzee in forum Trouble ShootingReplies: 12Last Post: 25-02-2009, 11:19 AM -
small display cabinet keeps seizing up CF motors
By paul_h in forum CommercialReplies: 8Last Post: 11-11-2007, 01:56 PM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM