Results 1 to 2 of 2
Thread: New Member, New System
-
04-05-2010, 09:49 PM #1
New Member, New System
Hey RE.com.
I've been lurking around here for a few months gleaning useful information for a project I'm starting up. It's a waste heat recovery system that's being built at the Colorado State University Engines and Energy Conversion Lab. The system will be running on R245fa with an experimental turbine.
I would like to start a thread somewhere on the RE forum with details, and to start a discussion on this system, and of course to pose some questions to the forum.
What section would be the best place to start such a thread?
Thanks!
-Nick
-
04-05-2010, 10:15 PM #2
Re: New Member, New System
Hi Nick and welcome to the forum.
You could try either Technical Speculations or New Technologies.Brian - Newton Abbot, Devon, UK
Retired March 2015
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
Ammonia Heat Pumps
By US Iceman in forum New TechnologiesReplies: 39Last Post: 22-03-2010, 06:36 PM -
Enthalpy Increasing Buffer System
By Reflexive in forum Technical SpeculationsReplies: 3Last Post: 23-12-2008, 03:18 PM -
Fan model for system optimization
By autt in forum System OptimizationReplies: 8Last Post: 31-03-2007, 05:34 AM -
Automotive A/C Vent Temp Range vs System
By Don Browney in forum Air ConditioningReplies: 1Last Post: 15-05-2002, 06:19 AM