Results 1 to 4 of 4
-
04-05-2010, 06:26 PM #1
Dunham Bush, Thermocold Passwords
hi
i have a thermocold chiller supplied by Dunham bush that as a carel PCO1 controller,
i need a high level password for it
the low level password is 66 does anyone have any higher passwords that i can try
the rock
-
09-05-2010, 06:28 AM #2
Re: Dunham Bush, Thermocold Passwords
I think u've got the highest level pswd.
Factory parameters: Accessible with the 66 “Factory” password, allow the configuration of all the unit
parameters.
• Super User parameters: Accessible with the 11 “Super User” password, allow the configuration
of the Super User, User and Direct parameters.
• User parameters: Accessible with password 22, allow the configuration of the parameters that typically
can be set by the user (User parameters) and the Direct parameters, consequently relating to the options.
• Direct parameters: Accessible without password, this are used to read the probe measurements and
any data, by any user, without compromising the operation of the unit.
-
09-05-2010, 07:50 AM #3
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
09-05-2010, 04:18 PM #4
Re: Dunham Bush, Thermocold Passwords
thanks for the replies
little turtle i will give the other passwords you mentioned a go and see if i can get any further
i spoke to someone from Carel in Italy and he seems to think that i can not change the set up because of the PLD display thats fitted
he,s going to get back to me with more details (hopefully)
the rock
Similar Threads
-
Dunham Bush Chiller Alarm
By Regulator in forum Air ConditioningReplies: 11Last Post: 08-12-2010, 01:42 AM -
WCFX dunham Bush
By jure in forum Trouble ShootingReplies: 1Last Post: 13-01-2010, 07:53 PM -
Dunham Bush scew
By RANGER1 in forum Industrial CompressorsReplies: 1Last Post: 22-12-2009, 01:36 PM -
dunham bush package chiller
By bmsguy in forum Air ConditioningReplies: 2Last Post: 09-06-2008, 08:51 PM -
Dunham Bush Chiller Fault Codes
By iceman007 in forum CommercialReplies: 7Last Post: 09-02-2008, 07:08 PM