Results 1 to 18 of 18
Thread: Injector instead of TX Valve
Threaded View
-
01-05-2010, 01:38 PM #1
Injector instead of TX Valve
I'm working on a design of a 400 kW water chiller using R407c. The chiller has to be as absolutely simple as possible and it has to be explosion proof. It will have to work in a coal mine. I have an idea to use an injector instead of a thermal expansion valve. (Phillips in the US is one of the better known suppliers)
Reason: more simple and one less thing to break.
Anybody have any thoughts on this?
Similar Threads
-
Howden slide valve problems
By CanadianIce in forum Industrial CompressorsReplies: 9Last Post: 29-06-2010, 04:38 PM -
LEV does not open
By Yuri B. in forum Air ConditioningReplies: 7Last Post: 19-07-2009, 02:37 PM -
Motorized Ball valve versus Globe valve for modulating application
By Sridhar1312 in forum IndustrialReplies: 2Last Post: 06-02-2009, 07:35 PM -
R22 Flooded System - Trawler
By chiefbecker in forum System OptimizationReplies: 18Last Post: 07-02-2008, 11:11 PM -
Benji
By benji in forum Trouble ShootingReplies: 29Last Post: 30-01-2008, 01:25 PM