Results 1 to 5 of 5
Thread: Troubleshooting help
Threaded View
-
27-04-2010, 12:25 AM #1
Troubleshooting help
I repaired a morgue refrigerator back in january.as of yesterday the box is running hot @ 60 degrees. Pressures are good no bubbles in the sight glass i am thinking restriction but in january a new txv and drier were installed no temp drop accross the drier. I need feed back please on a few possibilities to look for.
Similar Threads
-
need troubleshooting charts
By mcm12263 in forum New to REReplies: 1Last Post: 13-05-2009, 10:19 PM -
troubleshooting books
By marc5180 in forum Refrigeration BooksReplies: 42Last Post: 04-04-2009, 06:08 PM -
Troubleshooting a vacuum pump and gauge set.
By Old Codger in forum FundamentalsReplies: 7Last Post: 08-08-2008, 05:13 PM -
Copeland scroll troubleshooting
By nike123 in forum Trouble ShootingReplies: 8Last Post: 26-02-2008, 05:37 PM -
Looking For A Good Troubleshooting Guide
By nightranger121 in forum Trouble ShootingReplies: 10Last Post: 23-11-2007, 06:16 PM