Results 1 to 4 of 4
Thread: Screw compressor use R23
-
25-04-2010, 01:23 PM #1
Screw compressor use R23
Hi.Have anyone been use a screw compressor make cascade refrigeration R23/R404a.Now I am trying design a cascade system and interesting in screw compressor .My heatload is 240 kw at evap temp -75 c.
-
25-05-2010, 02:06 PM #2
Re: Screw compressor use R23
i worked on case cade but the compressor was not screw type
-
25-05-2010, 02:07 PM #3
Re: Screw compressor use R23
at this time what u have study about this systme. and how you will design condencer and evaporator
-
26-05-2010, 04:02 AM #4
Re: Screw compressor use R23
Are you sure about the capacity?
It too high for -70°C. Usually cascade systems are very small.
Also, you have to ask the screw manufacturer to see if their compressor can run with R23.
Again, your capacity is way too high.Even Einstein Asked Questions
Similar Threads
-
VSD on screw machines
By Mike Hopkins in forum New TechnologiesReplies: 14Last Post: 20-02-2011, 12:10 AM -
Compressors - screw or reciprocating?
By Josip in forum Industrial CompressorsReplies: 18Last Post: 27-01-2009, 10:36 PM -
advantage of twin screw compressor over single screw compressor
By azzah in forum New to REReplies: 7Last Post: 23-09-2008, 09:24 AM -
Autoloading slide valve for Screw compressor
By screw_geek in forum Industrial CompressorsReplies: 32Last Post: 04-04-2008, 03:47 AM -
Mono or twin screw
By Nirmalya in forum Industrial CompressorsReplies: 43Last Post: 12-09-2006, 03:19 AM